Investigation of the effect of modifying additives on the properties of copper obtained by casting

Capa

Citar

Texto integral

Resumo

The effect of additives containing chromium, zirconium, silicocalcium and carbon nanotubes on the physical-mechanical properties of copper obtained by casting is investigated. The tensile strength increased to 10.5%, Young’s modulus increased by 11.6–106.2%. The heat resistance of samples using SiCa increased by 1.9 times, Cu–Zr – by 1.5 times, with the use of nanotubes decreased by 1.2–1.8 times.

Sobre autores

B. Tolochko

Institute of Solid-State Chemistry and Mechanochemistry of the Siberian Branch of the Russian Academy of Science

Email: a-zhdanok@mail.ru
Russia, 630128, Novosibirsk

A. Zhdanok

Institute of Solid-State Chemistry and Mechanochemistry of the Siberian Branch of the Russian Academy of Science

Autor responsável pela correspondência
Email: a-zhdanok@mail.ru
Russia, 630128, Novosibirsk

V. Kuznetsov

Institute of Solid-State Chemistry and Mechanochemistry of the Siberian Branch of the Russian Academy of Science

Email: a-zhdanok@mail.ru
Russia, 630128, Novosibirsk

Z. Korotaeva

Institute of Solid-State Chemistry and Mechanochemistry of the Siberian Branch of the Russian Academy of Science

Email: a-zhdanok@mail.ru
Russia, 630128, Novosibirsk

L. Berdnikova

Institute of Solid-State Chemistry and Mechanochemistry of the Siberian Branch of the Russian Academy of Science

Email: a-zhdanok@mail.ru
Russia, 630128, Novosibirsk

N. Stepanova

Novosibirsk State Technical University

Email: a-zhdanok@mail.ru
Russia, 630073, Novosibirsk

M. Mikhaylenko

Institute of Solid-State Chemistry and Mechanochemistry of the Siberian Branch of the Russian Academy of Science

Email: a-zhdanok@mail.ru
Russia, 630128, Novosibirsk

Bibliografia

  1. Логинов Ю.Н. Медь и деформируемые медные сплавы. Учебное пособие. Екатеринбург: Урал. гос. техн. ун-т – УПИ, 2004. 136 с.
  2. Задруцкий П., Немененок Б.М. Производство отливок из сплавов цветных металлов. Лабораторный практикум. Минск: БНТУ, 2018. 54 с.
  3. Bustos O.C. Untersuchung zur Kornfeinung von Reinstkupfer durch chemische Zusätze und Deutung der Vorgänge. PhD Thesis. Berlin, 1990.
  4. Cziegler A., Geraseva O., Schumacher P. // Metals. 2017. V. 7. No. 9. Art. No. 383.
  5. Cziegler A.K., Schumacher P. // Int. J. Cast Met. Res. 2017. V. 30. No. 4. P. 251.
  6. Sulitsin A.V., Mysik R.K., Brusnitsyn S.V. // Solid State Phenom. 2018. V. 284. P. 357.
  7. Balart M.J., Patel J.B., Fan Z. // Int. J. Cast Met. Res. 2015. V. 28. No. 4. P. 242.
  8. Li K., McGuire M., Lupini A. et al. // ACS Appl. Nano Mater. 2020. V. 3. No. 7. P. 6863.
  9. Sundaram R.M., Sekiguchi A., Sekiya M. et al. // Royal Soc. Open Sci. 2018. No. 5. Art. No. 180814.
  10. Hannula P.M., Masquelier N., Lassila S. et al. // J. Alloys Compounds. 2018. V. 746. No. 5. P. 218.
  11. Borodianskiy K. // J. Mater. Sci. 2019. V. 54. Art. No. 13767.

Arquivos suplementares

Arquivos suplementares
Ação
1. JATS XML
2.

Baixar (1MB)
3.

Baixar (1MB)
4.

Baixar (4MB)
5.

Baixar (4MB)

Declaração de direitos autorais © Б.П. Толочко, А.А. Жданок, В.А. Кузнецов, З.А. Коротаева, Л.К. Бердникова, Н.В. Степанова, М.А. Михайленко, 2023

Согласие на обработку персональных данных

 

Используя сайт https://journals.rcsi.science, я (далее – «Пользователь» или «Субъект персональных данных») даю согласие на обработку персональных данных на этом сайте (текст Согласия) и на обработку персональных данных с помощью сервиса «Яндекс.Метрика» (текст Согласия).