| 期 |
标题 |
文件 |
| 卷 8, 编号 2-2 (2014) |
Influence of modes of diamond grinding on cutting forces during machining of structural ceramics |
(Rus)
|
|
Alexeev S.
|
| 卷 8, 编号 2-2 (2014) |
Improvement of cylindrical spur gears wear resistance |
(Rus)
|
|
Gorlenko O., Makarov G.
|
| 卷 8, 编号 2-2 (2014) |
Increase of functional reliability of hydraulic actuator of load-lifting devices |
(Rus)
|
|
Bekaev A., Maximov Y., Strokov P., Musakova T., Paponov A.
|
| 卷 8, 编号 2-2 (2014) |
Dependence of surface roughness from workpiece material and device structural parameters for combined cutting and surface plastic deformation in processing of non-rigid parts of hollow cylinder type |
(Rus)
|
|
Vetrova E., Lebedev P., Adeev A.
|
| 卷 8, 编号 2-2 (2014) |
Comparative studies of air-plasma and oxygen-plasma cutting |
(Rus)
|
|
Vasiliev A., Vnuk V., Zinoviev V., Kotkina T.
|
| 卷 8, 编号 1-2 (2014) |
Flexible technology of forged piston manufacturing in a small-scale production |
(Rus)
|
|
Posedko V., Shibaev O.
|
| 卷 8, 编号 1-2 (2014) |
Tribological characteristics of dispersed-filled composite materials |
(Rus)
|
|
Pechnikov A., Toleshuli A., Meshcheryakov E.
|
| 卷 8, 编号 1-2 (2014) |
Method of magnetic separation of fluids |
(Rus)
|
|
Samokhin V., Sandulyak A., Sandulyak A.
|
| 卷 8, 编号 1-2 (2014) |
Development of technological processes of cold forging metal-roll cutting with use of progressive methods of mathematical modeling |
(Rus)
|
|
Mishenko O., Fedorina E.
|
| 卷 8, 编号 1-2 (2014) |
Cast composite products with aluminium matrix |
(Rus)
|
|
Pechnikov A., Toleshuli A., Meshcheryakov E.
|
| 卷 8, 编号 1-2 (2014) |
75 anniversary of department “Technology of constructional materials” of Moscow State University of Mechanical Engineering (MAMI) |
(Rus)
|
|
Kuznetsov V., Shlykova A.
|
| 卷 8, 编号 1-2 (2014) |
Locally reinforced cast composite products with aluminium matrix |
(Rus)
|
|
Pechnikov A., Telenkova T.
|
| 卷 8, 编号 1-2 (2014) |
Tangential compensation of torsional vibrations of a workpiece in the technological system of combined cutting-deforming machining |
(Rus)
|
|
Ankin A., Chebyshev A.
|
| 卷 8, 编号 1-2 (2014) |
Influence of reinforcing on structure, mechanical and technological properties of composite materials |
(Rus)
|
|
Pechnikov A., Toleshuli A., Meshcheryakov E.
|
| 卷 8, 编号 1-2 (2014) |
Punch pressing of solidifying castings of silumins |
(Rus)
|
|
Batyshev A., Batyshev K., Stancheck L., Smolkin A., Shramko T.
|
| 卷 8, 编号 1-2 (2014) |
Innovations and problems of the course “Science of materials and technology of construction materials” |
(Rus)
|
|
Smolkin A., Batyshev A., Kuznetsov V.
|
| 卷 8, 编号 1-2 (2014) |
Increase of metal utilization factor through the use of combined operations of drawing-flanging in manufacture of box-shaped parts with a hole in a bottom part |
(Rus)
|
|
Nikitenko V.
|
| 卷 8, 编号 1-2 (2014) |
Structure and mechanical properties of silumin castings hardened under pressure |
(Rus)
|
|
Stancheck L., Banko B., Batyshev A., Batishev K.
|
| 卷 8, 编号 1-2 (2014) |
Piston workpieces produced by casting with crystallization under pressure |
(Rus)
|
|
Batyshev A., Batyshev K., Smolkin A., Bezpalko V.
|
| 卷 8, 编号 1-2 (2014) |
Promising physical and chemical processing of glass by concentrated streams of energy |
(Rus)
|
|
Opalnitskiy A., Petrov K.
|
| 卷 8, 编号 1-2 (2014) |
Overview of Russian inventions in field of roll-formed section cutting |
(Rus)
|
|
Zemskova A., Kokorin V., Filimonov V.
|
| 卷 8, 编号 1-2 (2014) |
Combined tools with plates equipped with STM for processing of stepped bores |
(Rus)
|
|
Grechischnikov V., Romanov V., Yunusov V.
|
| 卷 8, 编号 1-2 (2014) |
Experimental determination of axial residual stresses in the surface layer of coarse thread root |
(Rus)
|
|
Ovseenko A., Klauch D., Nosov D., Kudinov A., Bolotin G., Kotov I.
|
| 卷 8, 编号 1-2 (2014) |
Improving the efficiency of assembly technology for fuel injectors of gas-turbine engines by management of functional parameters of spray package parts |
(Rus)
|
|
Semenov A., Sazanov A.
|
| 卷 8, 编号 1-2 (2014) |
Industrial experience of industrial development of sheet parts of the nomenclature of “Utes” OJSC in individual production |
(Rus)
|
|
Kultuchkin M., Kokorin V., Polyakov S.
|
| 卷 8, 编号 1-2 (2014) |
Principles of selection of cutting technological mediums for metal cutting |
(Rus)
|
|
Kuscheva M., Klauch D., Kobelev O.
|
| 卷 8, 编号 1-2 (2014) |
Improvement of the technology of cutting modified globoidal gears with localized contact patch |
(Rus)
|
|
Fedotov B., Dumilin S., Schegolkov N., Belyakov V.
|
| 卷 8, 编号 1-2 (2014) |
Management of normative-technical information at mechanical engineering enterprises |
(Rus)
|
|
Krakovtsev V., Petrova T.
|
| 卷 8, 编号 1-2 (2014) |
Wear of multifaceted perishable carbide inserts in turning of experimental steel 75ХГСФ |
(Rus)
|
|
Volkov R.
|
| 卷 8, 编号 1-2 (2014) |
Increase in objectivity of selection of part blanks |
(Rus)
|
|
Medvedev O.
|
| 卷 8, 编号 1-2 (2014) |
The method of express-diagnostics of the roughness of the surface layer of machine parts on basis of a probabilistic model with hidden states |
(Rus)
|
|
Palamar I., Julin S.
|
| 卷 8, 编号 1-2 (2014) |
Groove machining on automobile parts |
(Rus)
|
|
Grechichnikov V., Pivkin P.
|
| 卷 8, 编号 1-2 (2014) |
Analysis of wear and causes of failure of high-speed spindles bearings |
(Rus)
|
|
Reshnyak S., Maksimov A.
|
| 卷 8, 编号 1-2 (2014) |
Study of mechanism of structure formation in a process of intensive consolidation of powders using the effect of interparticle splicing |
(Rus)
|
|
Kokorin V., Filimonov V., Sizov N., Kokorin A., Bryazgin M.
|
| 卷 8, 编号 1-2 (2014) |
Development of technology of hardening of large punch matrices |
(Rus)
|
|
Serezhkin M., Melnikov E.
|
| 卷 8, 编号 1-2 (2014) |
Use of artificial intelligence methods for constructing a mathematical model of a part for further technological design |
(Rus)
|
|
Kordyukov A.
|
| 卷 8, 编号 1-2 (2014) |
Interrelation of wear resistance with quality parameters of the surface layer of parts after machining |
(Rus)
|
|
Sutyagin A.
|
| 卷 8, 编号 1-2 (2014) |
Manufacture and processing of advanced composite materials |
(Rus)
|
|
Hashem M.
|
| 卷 8, 编号 1-2 (2014) |
Deformational snap temper of structural steel |
(Rus)
|
|
Prokhorova A., Borisova A.
|
| 卷 8, 编号 1-2 (2014) |
Developing of analytical model for bevel cutting |
(Rus)
|
|
Olenin L., Storchak M., Lekveischvili M.
|
| 卷 8, 编号 1-2 (2014) |
Improving the efficiency of assembly processes of gas turbine engines rotors, based on simulation technologies |
(Rus)
|
|
Timofeev М., Timofeeva Е.
|
| 卷 8, 编号 1-2 (2014) |
Statistical business process management - the key to success of a modern industrial enterprise |
(Rus)
|
|
Loktev D.
|
| 卷 8, 编号 1-2 (2014) |
Improvement of fatigue resistance of parts using technological methods |
(Rus)
|
|
Uryadov S.
|
| 卷 8, 编号 1-2 (2014) |
Improvement of helical surfaces machining |
(Rus)
|
|
Shchavelev P., Klepikov V., Soldatov V.
|
| 卷 8, 编号 1-2 (2014) |
Development of dynamometer system for measuring cutting forces when turning |
(Rus)
|
|
Bezyazichniy V., Kordyukov A., Timofeev M., Fomenko R.
|
| 卷 8, 编号 1-2 (2014) |
Adaptive optimization of bevel gear repair assembly of automobile transmissions |
(Rus)
|
|
Vinogradov V., Cherepakhin A.
|
| 卷 8, 编号 1-2 (2014) |
Modern worm milling cutters - design, tool materials and wear-resistant coatings |
(Rus)
|
|
Loktev D.
|
| 卷 8, 编号 1-2 (2014) |
Ensuring the quality of the surface layer and the reduction of process costs when machining R.N. Akinshin |
(Rus)
|
|
Akinshin R.
|
| 卷 8, 编号 1-2 (2014) |
The dependence of the accuracy of cylindrical toothed gears manufacturing from the precision of their major components and assemblies |
(Rus)
|
|
Vinogradov V., Cherepakhin A.
|
| 卷 8, 编号 1-2 (2014) |
Fundamental scientific discovery «Garkunov-Kragelskiy effect of the absence of wear » as an innovative form of intensification of industrial technologies and the development of scientific and educational processes |
(Rus)
|
|
Polyakov A., Chikhacheva N.
|
| 卷 8, 编号 1-2 (2014) |
New effective technologies and materials for production of heavy-duty gearboxes |
(Rus)
|
|
Ovumyan G., Klauch D., Nosov D., Dumilin S., Malysheva N., Mosyuk A.
|
| 卷 8, 编号 1-2 (2014) |
Determination of the minimum curvature radius of a die for isothermal direct axisymmetric extrusion of aluminum alloy AD35 |
(Rus)
|
|
Voronkov V.
|
| 卷 8, 编号 1-2 (2014) |
Functionally-oriented technologies of working surfaces treatment for automotive parts |
(Rus)
|
|
Suslov A.
|
| 卷 8, 编号 1-2 (2014) |
Study of processing of deep holes and fixing of tubes in parts of heat exchange equipment |
(Rus)
|
|
Yagutkin E., Kondratenko L., Gunin A., Mogutov I.
|
| 卷 8, 编号 1-2 (2014) |
Increase of cutting tool wear resistance by mesh cover coating |
(Rus)
|
|
Chekalova E., Chekalov P.
|
| 卷 8, 编号 1-2 (2014) |
Non-wearing friction and hydrogen wear of metals when solving basic tribological problems of mechanisms and machines quality |
(Rus)
|
|
Garkunov D., Melnikov E.
|
| 卷 8, 编号 1-2 (2014) |
Influence of the type of wide nomenclature of a machine-building production on the size of unproductive losses of time in the technological and production processes of manufacturing |
(Rus)
|
|
Ryabov A.
|
| 卷 8, 编号 1-2 (2014) |
The integrated logistic support for after-sales service of aviation gas turbine engines and gas-pumping installations |
(Rus)
|
|
Kalugin S.
|
| 卷 8, 编号 1-2 (2014) |
Increase of cutting tool wear resistance by diffusion mesh cover coating |
(Rus)
|
|
Chekalova E., Chekalov P.
|
| 卷 8, 编号 4-1 (2014) |
Carbon materials for parts of gas-turbine engines and internal combustion engines, problems and prospects |
(Rus)
|
|
Pyatov I., Shiboev O., Buzinov V., Makarov A., Kostyukov A., Posedko V., Finkelberg L., Kostyuchenkov A.
|
| 卷 8, 编号 4-1 (2014) |
Dynamic analysis of parameters of front truck cabin suspension |
(Rus)
|
|
Gorobtsov A., Kartsov S., Polyakov Y., Dyakov A.
|
| 卷 8, 编号 4-1 (2014) |
Study of parametric oscillations of an automobile wheel |
(Rus)
|
|
Shcherbakov V.
|
| 卷 8, 编号 4-1 (2014) |
Application of flap gas-dynamic bearing in turbine-generator units of low power |
(Rus)
|
|
Rumyantsev M., Zakharova N., Sigachev S.
|
| 卷 8, 编号 4-1 (2014) |
Optimization of heat exchanger heat transfer surface of the engine with external heat supply |
(Rus)
|
|
Ilyin A., Merkulov V.
|
| 卷 8, 编号 4-1 (2014) |
Optimization of the automotive microturbine diffuser output geometry |
(Rus)
|
|
Andreenkov A.
|
| 卷 8, 编号 4-1 (2014) |
Development of supercharging systems for internal combustion engines for variuos purposes |
(Rus)
|
|
Kaminskiy R.
|
| 卷 8, 编号 4-1 (2014) |
The use of coefficient of rotating mass in determining reduced (equivalent) moments of inertia |
(Rus)
|
|
Gusakov D.
|
| 卷 8, 编号 4-1 (2014) |
Overview of the problem of moist air flow in turbo-expanders |
(Rus)
|
|
Martyanov O., Merkulov V.
|
| 卷 8, 编号 4-1 (2014) |
Analysis of the results of mathematical modeling of curvilinear motion of three-axle all-wheel drive vehicle with locked interaxle drive |
(Rus)
|
|
Lepeshkin A., Katanaev N., Medvedev A., Simochkin A.
|
| 卷 8, 编号 4-1 (2014) |
Unification of certain terms and concepts used in theories of tractor, automobile, high speed wheeled and tracked transport-traction vehicles |
(Rus)
|
|
Parfenov A., Shchetinin Y.
|
| 卷 8, 编号 4-1 (2014) |
Stabilization of gas temperature and rotor speed on test-bench for control and research testing of turbochargers by means of automation |
(Rus)
|
|
Kovaltsov I., Kaminskiy R., Kaminskiy V., Sibiryakov S., Korneev S., Zaitsev O.
|
| 卷 8, 编号 4-1 (2014) |
Use of energy storage materials as alternative fuel for stationary and transport power stations |
(Rus)
|
|
Kuznetsov V., Loik A.
|
| 卷 8, 编号 4-1 (2014) |
Study of the thermal state of urbomachine blades by means of software complex |
(Rus)
|
|
Kovalnogov V., Fedorov R., Generalov D.
|
| 卷 8, 编号 4-1 (2014) |
Calculation and optimization of weight measuring sensor in motor-truck scales |
(Rus)
|
|
Gavryushin S., Nepochatov A., Godzikovskiy V.
|
| 卷 8, 编号 4-1 (2014) |
Modern requirements for impeller machines for microturbine energy systems |
(Rus)
|
|
Kostyukov A., Datsenko V., Sinkevich E., Kosoy A.
|
| 卷 8, 编号 4-1 (2014) |
Development of controlled turbo-electric compressor |
(Rus)
|
|
Lazarev A., Kaminskiy V., Kaminskiy R., Sibiryakov S., Grigorov I., Kostyukov E.
|
| 卷 8, 编号 4-1 (2014) |
Analysis of the study of turbomachine impeller oscillations |
(Rus)
|
|
Seleznev V., Ilyinskaya O., Pavlov Y.
|
| 卷 8, 编号 4-1 (2014) |
Development of a low-pressure turbocharger with axial turbine for a two-stage turbocharging system |
(Rus)
|
|
Grigorov I., Kaminsky V., Kaminsky R., Sibiryakov S., Lazarev A., Kostyukov E., Shuripa V.
|
| 卷 8, 编号 4-1 (2014) |
Specified target setting for synthesis of algorithms for automatic robust control of technology systems |
(Rus)
|
|
Esakov A., Kretov A.
|
| 卷 8, 编号 4-1 (2014) |
Multi-purpose high-performance micro-turbines |
(Rus)
|
|
Kostyukov A., Gornovskiy A., Kosach L.
|
| 卷 8, 编号 3-1 (2014) |
Evaluation of fatigue life of thin-walled steel structures of mobile machines with a random complex stress state |
(Rus)
|
|
Gusev A., Shcherbakov V., Starodubtseva S.
|
| 卷 8, 编号 3-1 (2014) |
Force interaction in cam-roller clutch |
(Rus)
|
|
Strokov A.
|
| 卷 8, 编号 3-1 (2014) |
HIL-simulation as an instrument for elaboration of automotive drivetrains with wheels torques distribution |
(Rus)
|
|
Kulikov I.
|
| 卷 8, 编号 3-1 (2014) |
Hybrid powerplant with the function of an asymmetric distribution of power flow through inter-wheel differential |
(Rus)
|
|
Dementyev Y., Krutashov A., Deev O.
|
| 卷 8, 编号 3-1 (2014) |
Development of test bench for research of vehicles with hybrid powertrains |
(Rus)
|
|
Nagaitsev M.
|
| 卷 8, 编号 3-1 (2014) |
Optimization of suspension system of high-speed tracked vehicles |
(Rus)
|
|
Savochkin V., Sharipov V., Smirnova I., Shishanov S.
|
| 卷 8, 编号 3-1 (2014) |
Interconnection of ion current with carbon concentration in fuel and the apparent propagation velocity of flame |
(Rus)
|
|
Shaykin A., Ivashin P., Galiev I.
|
| 卷 8, 编号 3-1 (2014) |
Evolution of concept art and design concepts in automotive design of the XX century |
(Rus)
|
|
Lepeshkin I., Kruglov S., Lepeshkin A.
|
| 卷 8, 编号 3-1 (2014) |
Development of external indirect control pressure in pneumatic tires |
(Rus)
|
|
Ivanov A., Shadrin S., Karpukhin K.
|
| 卷 8, 编号 3-1 (2014) |
Parameters of engine’s electrical starting system with alternative supply sources |
(Rus)
|
|
Maleyev R., Mychka N., Gulin A., Kuznetsova Y.
|
| 卷 8, 编号 3-1 (2014) |
Evaluation of effectiveness of module hybrid power plant when choosing among engines of a specific range of electric power |
(Rus)
|
|
Dementyev Y., Krutashov A., Deev O.
|
| 卷 8, 编号 3-1 (2014) |
Application of methods to predict the durability of friction pads for automobile clutch |
(Rus)
|
|
Esakov A.
|
| 卷 8, 编号 3-1 (2014) |
Calculation of parameters of engine’s electrical starting system with combined supply source |
(Rus)
|
|
Maleyev R., Mychka N., Gulin A., Kapralova M.
|
| 卷 8, 编号 3-1 (2014) |
Need to control the air pressure in the tires of automobiles depending on the degree of its workload |
(Rus)
|
|
Krasavin P., Smirnov A.
|
| 卷 8, 编号 3-1 (2014) |
Analysis of icing of flow channel in vehicle turbochargers |
(Rus)
|
|
Martyanov O., Merkulov V.
|
| 卷 8, 编号 3-1 (2014) |
Similarity formula when machining impellers of centrifugal pumps |
(Rus)
|
|
Kondratiev A.
|
| 卷 8, 编号 3-1 (2014) |
Experimental and calculation method for determining traction properties of automobile tires in operation |
(Rus)
|
|
Shadrin S., Ivanov A.
|
| 卷 8, 编号 3-1 (2014) |
Features of air environment protection technology for objects of motor transport complex |
(Rus)
|
|
Mikhaylov V., Sharipova N.
|
| 卷 8, 编号 2-1 (2014) |
Assessment of changes in characteristics of clutch unit and linkage during operation of a passenger car |
(Rus)
|
|
Prokopyev M., Petunin V., Tarazanov S.
|
| 卷 8, 编号 2-1 (2014) |
Development of customer feedback systems in management of quality and reliability of cars during operation |
(Rus)
|
|
Kozlovskiy V., Maleev R., Polyakova E., Korotkov V.
|
| 卷 8, 编号 2-1 (2014) |
Problems of tractor design evolution |
(Rus)
|
|
Shipilevsky G.
|
| 卷 8, 编号 2-1 (2014) |
Single pair gear shifting in tractor gearboxes |
(Rus)
|
|
Alendeyev E.
|
| 卷 8, 编号 2-1 (2014) |
Electric power steering for a car |
(Rus)
|
|
Prokhorov V., Devochkin O.
|
| 卷 8, 编号 2-1 (2014) |
Complex of analytical tools for assessment of effectiveness of measures aimed at automobile reliability improvement |
(Rus)
|
|
Kozlovskiy V., Maleev R., Panyukov D., Kudinova L.
|
| 卷 8, 编号 2-1 (2014) |
Use of magnetic materials in electrical machines in vehicles |
(Rus)
|
|
Rozin P., Akimov A.
|
| 卷 8, 编号 2-1 (2014) |
History of concept art and design concepts in the transportation design |
(Rus)
|
|
Lepeshkin I., Kruglov S.
|
| 卷 8, 编号 2-1 (2014) |
Automated control-test stand for study of automobile and bus generator sets |
(Rus)
|
|
Chernov A., Akimov A.
|
| 卷 8, 编号 2-1 (2014) |
Use of composite materials in air conditioning systems in vehicles |
(Rus)
|
|
Nagaytsev R., Merkulov V.
|
| 卷 8, 编号 2-1 (2014) |
Mathematical modeling of piston movement in a cylinder |
(Rus)
|
|
Makarov A., Smirnov S., Osokin S.
|
| 卷 8, 编号 2-1 (2014) |
Development of common algorithms of control unit for long-haul tractor with hybrid power plant |
(Rus)
|
|
Nagaytsev M.
|
| 卷 8, 编号 2-1 (2014) |
Influence of torque distribution between axles on off-road capability of KamAZ-4350, 5350 and 6350 |
(Rus)
|
|
Komarov V., Ostretsov A., Kondrashov V.
|
| 卷 8, 编号 2-1 (2014) |
Hardware and software complex for robotic platform control |
(Rus)
|
|
Kondratyev K., Kharitonov V.
|
| 卷 8, 编号 2-1 (2014) |
Elimination of power flow break for gear actuation |
(Rus)
|
|
Tverskov B.
|
| 卷 8, 编号 2-1 (2014) |
Estimation of measurement uncertainty in testing vehicles in terms of external and internal noise |
(Rus)
|
|
Zakharov I., Zharko Y., Sergeyeva A.
|
| 卷 8, 编号 2-1 (2014) |
Design features of automobile LED head lighting |
(Rus)
|
|
Pakhomova E., Gorkin V., Yakunov D.
|
| 卷 8, 编号 2-1 (2014) |
Strength of polymer composites used in automotive industry |
(Rus)
|
|
Osipov N., Pirozhkov V., Chabunin I.
|
| 卷 8, 编号 1-1 (2014) |
Method of statistical linearization of nonlinear dynamics in systems of mobile machines |
(Rus)
|
|
Gusev A., Shcherbakov V., Chukanin Y., Starodubtseva S.
|
| 卷 8, 编号 1-1 (2014) |
Improving the dynamic characteristics of the hydraulic drive when braking |
(Rus)
|
|
Gurevich Y., Ivochkin M.
|
| 卷 8, 编号 1-1 (2014) |
Swirling jets behind vane swirlers in free space and in combustion chamber of a gas-turbine engine |
(Rus)
|
|
Emmil M.
|
| 卷 8, 编号 1-1 (2014) |
Search for ways of joining separate kinds of alternative energy resources in the sphere of long-term application of hydrogen power engineering in domestic transport |
(Rus)
|
|
Fomin V., Khripach N.
|
| 卷 8, 编号 1-1 (2014) |
Study of mechanism of influence of internal air flows on overall vehicle aerodynamics |
(Rus)
|
|
Petrov A.
|
| 卷 8, 编号 1-1 (2014) |
Study of the process of heat transfer in mesh matrix of rotary heat exchanger |
(Rus)
|
|
Alekseev R., Kostyukov A., Kosach L.
|
| 卷 8, 编号 1-1 (2014) |
Comparative evaluation of automobiles KAMAZ-4350, KAMAZ-43114 and Ural-4320-31 flotation on loose sand |
(Rus)
|
|
Ostretsov A., Esakov A., Sharipov V.
|
| 卷 8, 编号 1-1 (2014) |
An alternative source of electric energy on automobile: the use of exhaust gas energy |
(Rus)
|
|
Ovsiannikov E., Klyukin P., Ketsaris A., Akimov A.
|
| 卷 8, 编号 1-1 (2014) |
Development of software for detection of road markings |
(Rus)
|
|
Krasavin P., Kharitonov V., Chernokozov V.
|
| 卷 8, 编号 1-1 (2014) |
Design features of Formula racing cars |
(Rus)
|
|
Pletin D.
|
| 卷 8, 编号 1-1 (2014) |
The study of non-traditional power sources in electrical starting systems of internal combustion engines |
(Rus)
|
|
Maleev R., Shmatkov Y.
|
| 卷 8, 编号 1-1 (2014) |
The evolution of aerodynamic characteristics of KAMAZ automobiles |
(Rus)
|
|
Valeev D., Karabantsev V.
|
| 卷 8, 编号 1-1 (2014) |
Using of shaping-filters in motion control system of high speed caterpillar machine |
(Rus)
|
|
Derzhanskiy V., Taratorkin I., Karpov E.
|
| 卷 8, 编号 1-1 (2014) |
Analysis of technologies of processing alternative energy sources in motor fuel |
(Rus)
|
|
Fomin V., Apelinskiy D.
|
| 卷 8, 编号 1-1 (2014) |
The influence of the set angle of steered wheels on safety of vehicle in curvilinear motion |
(Rus)
|
|
Krasavin P., Nadezhdin V.
|
| 卷 8, 编号 1-1 (2014) |
Construction features of energy-absorbing seats used in the armored and aviation vehicles |
(Rus)
|
|
Kulakov N., Gavrilov E.
|
| 卷 7, 编号 1-6 (2013) |
One of the ways to describe scientific terminology in special dictionaries |
(Rus)
|
|
Anokhina T., Zaytseva T.
|
| 卷 7, 编号 1-6 (2013) |
Absenteeists as a political stratum of modern Russian society |
(Rus)
|
|
Abramov A., Rybina M., Davydova N.
|
| 卷 7, 编号 1-6 (2013) |
Economic transformations of the Perestroika period: 1985-1991's |
(Rus)
|
|
Abramova U., Dmitriev A.
|
| 卷 7, 编号 1-6 (2013) |
Analysis of the term from the position of the cognitive approach |
(Rus)
|
|
Zakirova E., Shvetsova E.
|
| 卷 7, 编号 1-6 (2013) |
Sources of formation and some of the structural-semantic peculiarities of forming the terms of the automotive industry in the Russian language |
(Rus)
|
|
Anokhina T., Zaytseva T., Martirosyan N.
|
| 卷 7, 编号 1-6 (2013) |
Aspects of the status and structure of the special vocabulary in the modern Russian language (ex. terms of mechanical engineering) |
(Rus)
|
|
Isaeva N., Zmazneva O.
|
| 卷 7, 编号 1-6 (2013) |
Terminology and terminography as components of the general theory of language for specific purposes (LSP) |
(Rus)
|
|
Zakirova E.
|
| 卷 7, 编号 1-6 (2013) |
Ways and means of overcoming social evil in Russian philosophy |
(Rus)
|
|
Barkova I.
|
| 卷 7, 编号 1-6 (2013) |
Activity approach to the study of organization and management |
(Rus)
|
|
Shabaykin A.
|
| 卷 7, 编号 1-6 (2013) |
Methodology development of research activity of the stock market U |
(Rus)
|
|
Inozemtseva U.
|
| 卷 7, 编号 1-6 (2013) |
The nature of social and ethnic conflict |
(Rus)
|
|
Chulkova O.
|
| 卷 7, 编号 1-6 (2013) |
Analysis of the level of adaptation of students to the newly formed specialty educational environment of high school |
(Rus)
|
|
Koshevoy O., Chirkina M., Tumanov A.
|
| 卷 7, 编号 1-6 (2013) |
Problems of qualified specialists training in higher education |
(Rus)
|
|
Lapteva V.
|
| 卷 7, 编号 1-6 (2013) |
Considering of the interest to the kinds of reading in foreign language teaching of undergraduate students in a non-linguistic university |
(Rus)
|
|
Koplyakva E.
|
| 卷 7, 编号 1-6 (2013) |
The formation of national workers' faculties in Soviet Russia |
(Rus)
|
|
Panin E.
|
| 卷 7, 编号 1-6 (2013) |
Improving of the training of technical university graduates in terms of innovative development of economy |
(Rus)
|
|
Kazakova S., Meshcheryakova E.
|
| 卷 7, 编号 1-6 (2013) |
Educational-methodical maintenance of "Physical Education" discipline based on multimedia technologies |
(Rus)
|
|
Smolina V.
|
| 卷 7, 编号 1-6 (2013) |
General views of individual physical training and ways of restoration of the human body |
(Rus)
|
|
Semenova M., Prusakova V.
|
| 901 - 1050 的 2404 信息 |
<< < 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 > >>
|
