Email this article 
Synthesis of the Structure of Technological Processes
- Authors: Kalyakulin S.Y.1, Kuzmin V.V.1, Mitin E.V.1, Suldin S.P.1, Tyurbeeva T.B.2
-
Affiliations:
- National Research Mordovia State University
- Moscow State University of Technology “STANKIN”
- Issue: Vol 30, No 2 (2020)
- Pages: 287-299
- Section: Информатика, вычислительная техника и управление
- Submitted: 19.08.2025
- Accepted: 19.08.2025
- Published: 15.09.2025
- URL: https://medbiosci.ru/2658-4123/article/view/304976
- DOI: https://doi.org/10.15507/2658-4123.030.202002.287-299
- ID: 304976
Cite item
Full Text
Abstract
Introduction. The purpose of the study is to increase the level of automation of the technical documentation development through solving a problem of synthesis of the structure of technological processes.
Materials and Methods. The authors reviewed the current status of the issue of developing the automated structure for technological processes that have shown the complexity of its formalization because of a considerable quantity of factors which must be considered in developing. The algorithm for solving these tasks based on synthesis of technological processes has been developed.
Results. The authors identified the relations between the parameters of the structure of technological processes based on the formation of many admissible transitions. The generalized algorithm on the basis of the synthesis is developed.
Discussion and Conclusion. The tasks solved in this article allow increasing the level of automation of calculation of the parameters in systems of automated designing. The implementation of the algorithm for designing technological processes, which is developed on the basis of synthesis, allows increasing the general level of automation of designing technological processes.
Keywords
Full Text
-
About the authors
Sergey Yu. Kalyakulin
National Research Mordovia State University
Author for correspondence.
Email: rim-tm@mail.ru
ORCID iD: 0000-0003-0644-7746
ResearcherId: O-6519-2017
Associate Professor of Chair of Mechanical Engineering Technology, Ph.D. (Engineering)
Russian Federation, 68 Bolshevistskaya St., Saransk 430005Vladimir V. Kuzmin
National Research Mordovia State University
Email: kvv2607@yandex.ru
ORCID iD: 0000-0001-6318-8563
ResearcherId: V-5405-2017
Professor of Chair of Mechanical Engineering Technology, D.Sc. (Engineering)
Russian Federation, 68 Bolshevistskaya St., Saransk 430005Eduard V. Mitin
National Research Mordovia State University
Email: rimnauka@rambler.ru
ORCID iD: 0000-0002-9899-3420
ResearcherId: V-5383-2017
Associate Professor of Chair of Mechanical Engineering Technology, Ph.D. (Engineering)
Russian Federation, 68 Bolshevistskay St., Saransk 430005Sergey P. Suldin
National Research Mordovia State University
Email: rimstanok@mail.ru
ORCID iD: 0000-0002-8159-6322
ResearcherId: V-5381-2017
Head of Chair of Mechanical Engineering Technology, Ph.D. (Engineering), Associate Professor
Russian Federation, 68 Bolshevistskaya St., SaranskTatiana B. Tyurbeeva
Moscow State University of Technology “STANKIN”
Email: turbeev@mail.ru
ORCID iD: 0000-0001-6693-5974
ResearcherId: V-5050-2017
Associate Professor of Chair of Information Technology , Ph.D. (Engineering)
Russian Federation, 1 Vadkovskiy Pereulok, Moscow 127994References
- Milovzorov O.V. Implementation of the Principles of Synthesis of Technological Processes from a Generalized Structure Based on the T-Flex Technology System. Vestnik Ryazanskogo gosudarstvennogo radiotekhnicheskogo universiteta = Ryazan State Radio Engineering University Bulletin. 2015;(54):133-138. (In Russ.)
- Lutov A.G., Ryabov Yu.V., Shaydullin R.I., et al. Intellectual Control of Processes of Technological Preparation of Machine-Building Production. Vestnik Yuzhno-Uralskogo gosudarstvennogo universiteta.Seriya: Kompyuternye tekhnologii, upravlenie, radioelektronika = South Ural State University Bulletin.Series: Computer Technology, Automatic Control, Radio Electronics. 2017; 17(3):117-124. (In Russ.)DOI: https://doi.org/10.14529/ctcr170312
- Mitin S.G., Bochkarev P.Yu. Models and Methods of Automation of Procedures for Development of Structures of Technological Operations Implemented on the Equipment of the Large Group.Izvestiya vysshikh uchebnykh zavedeniy. Povolzhskiy region. Tekhnicheskie nauki = University Proceedings.Volga Region. Engineering Sciences. Computer Science. 2018; (2):119-130. (In Russ.) DOI:https://doi.org/10.21685/2072-3059-2018-2-11
- Igrusha V.A., Sosinskaya S.S. Formalization of Description of Technological Processes for Manufacturing of Machine-Building Parts on the Basis of Ontology and Object-Oriented Databases. Ontologiya proektirovaniya = Ontology of Designing. 2017; (1):77-88. (In Russ.) DOI: https://doi.org/10.18287/2223-9537-2017-7-1-77-88
- Novikov O.A., Baybakov S.V. Methods for Selecting Technological Bases when Designing Machining Processes. Upravlenie kachestvom v neftegazovom komplekse = Quality Management in Oil and Gas Complex. 2009; (4):73-75. (In Russ.)
- Baybakov S.V. Complex Automation System of Process Planning. Programmnye produkty i sistemy = Software & Systems. 2010; (1):28. Available at: http://www.swsys.ru/index.php?page=article&id=2437&lang= (accessed 27.04.2020). (In Russ.)
- Kalyakulin S.Yu., Kuzmin V.V., Mitin E.V., et al. Designing the Structure of Technological Processes Based on Synthesis. Vestnik Mordovskogo universiteta = Mordovia University Bulletin. 2018;28(1):77-84. (In Russ.) DOI: https://doi.org/10.15507/0236-2910.028.201801.077-084
- Kuzmin V.V., Maksimovskiy D.E. Choice of Technological Bases on the Basis of the Decision of a Direct Problem of the Dimensional Analysis. Vestnik MGTU “STANKIN” = MSTU STANKIN Bulletin.2012; 2:64-69. Available at: http://www.stankin-journal.ru/ru/articles/590 (In Russ.) (accessed 27.04.2020). (In Russ.)
- Maksimovskiy D.E. Automation of Process Design by Design-Technological Parameterization.Russian Engineering Research. 2011; 31(9):870-872. (In Eng.) DOI: https://doi.org/10.3103/S1068798X1109019X
- Kalyakulin S.Yu. Algorithm for Calculating the Parameters of the Initial Blank in the SITEP MO Automated Design System. Russian Engineering Research. 2014; 34(11):713-715. (In Eng.) DOI: https://doi.org/10.3103/S1068798X14110082
- Kuznetsov P.M., Khoroshko L.L. Digitization of Crushing and Milling Equipment Reconditioning.Gornyy informatsionno-analiticheskiy byulleten (nauchno-tekhnicheskiy zhurnal) = Mining Informational and Analytical Bulletin (Scientific and Technical Journal). 2019; (10):195-205. (In Russ.) DOI:https://doi.org/10.25018/0236-1493-2019-10-0-195-205
- Tsyrkov A.V., Kuznetsov P.M., Tsyrkov G.A., et al. Project and Operations Management ofMachine-Building Production. Vestnik Mordovskogo universiteta = Mordovia University Bulletin. 2018;28(4):511–522. (In Russ.) DOI: https://doi.org/10.15507/0236-2910.028.201804.511-522
- Butko A.O., Kuznetsov P.M. Building Information Models in Integrated Systems. Oboronnyykompleks – nauchno-tekhnicheskomu progressu Rossii = Defense Complex to Scientific and TechnicalProgress of Russia. 2019; (3):20-25. Available at: http://izdat.ntckompas.ru/editions/for_readers/archive/article_detail.php?SECTION_ID=160&ELEMENT_ID=24794 (accessed 27.04.2020). (In Russ.)
- Moskvin V.K., Kuznetsov P.M. Drive of a Technological Robot of a Turning Robotic Complex.Tehnologiya mashinostroeniya = Engineering Technology. 2018; (11):45-48. Available at: http://www.ictm.ru/info/11_254 (accessed 27.04.2020). (In Russ.)
Supplementary files
